860~ 960 Mhz, 27 x 17 mm, tamper proof, Impinj Monza R6-P, M730/ M750, NXP UCODE 7/8/9 chip, 96-128 bit EPC, 1 meter read distance, ISO18000-6C protocol
Download Specification
GEE-UT-8220 is a one-off UHF RFID tags, which worked at 860~ 960 Mhz with RFID chip embedded. By using brittle paper as base material, this type of tags is ultra-thin and would be permanently damaged when being tear off. Therefore this tags can greatly prevent someone reusing these tags for faking products. Typical applications: Anti-fake labels for branded wine, valuable jewelry, certificates, cheque.
Main features:
● Brittle paper as base material, break if being tear-off
● High performance RFID chip
● World wide UHF supported
● 1 m Read distance under 7dBi antenna
● High security: UID, write protection, EAS ( NXP UCODE G2XM only)
● Multiple tags operation allowed
● Anti-fake printing technology, like Fluorescent ink, infrared ink, security line, latent image
● Advanced RFID tag production technology and ISO9001 quality control
● Green products, ROHS, SGS compliance
Physical | |
Material | Brittle Paper |
Size | 27mm x 17 mm |
Thickness | 0.10mm |
Antenna | Etched aluminum, model: 8220 |
Printing | white blank, printable |
Packing | 10,000 pcs/ roll, Roll ID 76 mm, OD< 300 mm |
G.W | 10 kg/ roll |
Protocol | ISO18000-6C & EPCglobal Class I Gen 2 |
RF features | |
Frequency | 860~ 960 Mhz |
Chip | Impinj Monza R6-P, M730/ M750, NXP UCODE 7/8/9 |
Memory | 96-128 bit EPC, depended on chip typoe |
Read distance | 1 meter |
Write endurance | 100,000 cycles |
Data retention | 50 years |
Other features | |
Security | TID, password |
Tensile strength | Equipment direction: 258 N/ 25 mm |
Lateral direction: 128N/ 25 mm | |
Tearing strength | 58g at equipment direction |
Antifake printing | Fluorescent ink, infrared ink,security line, laten image, barcode |
Environment | |
Operating condition | -20 ~ 60 Degree Celsius, 5~ 95% RH, no condensation |
Storage condition | -10 ~ 45 Degree Celsius, 5~ 95% RH, no condensation |
ESD | +/ -2000V peak |
Bending diameter | > 50 mm, tension less than 10 N |
Shelf life | 2 years |
In transportation and ticketing feild, the traditional payment is by a simple paper ticket that bears some of security features, like florescent ink, security line, latent image, barcode, infra-red ink. Through it can be prevent most of the fake tickets, however hard work load, low identification rate, and relevant unsafe features enforce institutions had to recruit abundant workforce to maintain normally operation, and now everything was changed as RFID technology deeply implanted into this sector.
At most of bus station or subway station, you will not no longer find any paper tickets any more, which replaced them was a simple recharge card or NFC mobile phones. And in recent years, the pace of changing speeds up dramatically.
Thanks to the RFID technology, you do need to wait in line for ticket checking, all just by a simple touch, and you are allowed to get through, and payment will automatically deducted by the RFID readers.
The benefits are not only in its convenience, but also its security. Each RFID card will have a unique ID, which is permanently stored in its ROM, and can not be rewritten. Meanwhile the communication between the RFID card and RFID readers is encrypted. Let’s take oyster card( London metro card) for example, this type of card is embedded with NXP Mifare Desfire chip, which the chip is integrated with the 3DES encryption technology, and still now there is zero case of password being cracked.
This RFID technology also have been applied into certain of big event, such as Olympics, World Expo…
In the future, we will see more and more case of this advanced RFID technology being applied in our normal life, and therefore change our life for ever.
73 x 23 mm, Alien Higgs 3, 512 bit user memory, 7 meter read distance
98 x 27 mm, NXP UCODE 7 chip, 10 meter read distance, ISO18000-6C
Shop the GEENFC Online store ,visit GEENFC Amazon Store or Aliexpress store . For Wholesalers please Contact us by email or skype